製品詳細

現在編集作業中です。しばらくお待ちください。
We are currently working on editing. Please be patient.

IDK Immersion Heaters Type MF

 

IDK IMMERSION HEATERs Type MF are general purpose electric heating elements consisting of tubular heaters with flange used for mounting via gaskets with mating flange provided on tanks or the other containers, similar to the type S Immersion Heaters, are used for the heating of water, general oils and extensively used for air, gas, steam.

This heater, you need to determine the specifications of the best is aware enough to use conditions object to be heated, operating temperature, and operating pressure. For heater for heating water and oil is most commonly used, We have established a standard, such as in the following table. Please use this unless special.
In addition, the flange of the standard specification, since has become a steel flange nominal pressure 5kg/cm2 JIS B 2221, the case of the pressure stage than this, please contact us.

Terminal cover of IDK IMMERSION HEATER Type MF
1. In the terminal cover of IDK IMMERSION HEATERs Type MF, the types shown in photo A and B are their standard ones, but it is possible to adopt water proof type, explosion proof type, if neccesary.
But in the case of adopting explosion proof construction, special treatment on Safety Rules of Government being neccesary, please negotiate with our company over a matter.
Furthermore, installation of heat sensitive tube for temperature controlling is available on the heater.
2. Please consult the heating of oils, it is necessary due to such temperature heating and viscosity, selecting a watt density.

PAGE TOP